Taking on a smaller, fun project: using a small slab of teak I picked up at an offcut sale many years ago to make an outdoor mat for shoes and boots.
Posts in "Photos"
Completed the hallway linen closet door. The top and bottom are open for airflow, as it’s used for bedding. Most interesting parts to me are the repurposed chair top used for the curve, embedded magnets to keep it closed, and I cut the grooves in the frame to house the cherry plywood panels by hand with as small as a lip as possible (about 1/8th of an inch).
Cutting the mortises for the hinges to hang the closest door I’m making. I always find this process a bit frightening.
Working on a long, narrow door to cover a narrow closet in our house where we keep sheets for bedding. The closet has a curved top. I’m using parts of a chair I got at a thrift store that perfectly matches this curve and plan to veneer it. We want to allow for air flow so this seems like a good solution.
Breaking down a sheet of cherry plywood with hand tools isn’t easy, but it’s mostly figuring out how to hold the work in place.
This was a fun, quick project: I used offcuts from the midcentury cabinet I just completed to make a small first aid station in the bathroom. This replaces an old, broken wall heater that came with the house. I made it removable in case I ever need to get to the electrical wiring I hid away in the wall. The frame of the cabinet has tiny little walnut splines for strength and it’s attached to the 1/4 inch box with glue and four dowels (made from toothpicks).
I completed my midcentury cherry cabinet, made with zero power tools. Here it is in place. The top sides are half blind dovetails, the base full dovetails. The door panels are 3/8 inch thick and slide along grooves. I’m pleased with how it turned out.
One of the sliding doors are fit in the mid-century cabinet project, one more to go and then on to the feet.
Years ago, a friend gave me an old wooden filing cabinet that was missing one of its side panels. Yesterday, I finally got around to converting it into a mobile tool caddy I can easily move around the shop.
I finished resawing the boards for one of the doors for the cabinet - I’m guessing this would take less than an hour or so with a bandsaw? It took me most of the day. I used a ryoba saw and had excellent results. My arm is spent.
